Cherokee County · Texas mill directory
Mc Cown Veneer
Veneer & plywood mill
Mc Cown Veneer is listed as a veneer and plywood plant at 4022 FM 347 North, Jacksonville, TX 75766, in Cherokee County. If you came looking for a veneer and plywood plant near me, this is the Jacksonville end of that question: the address is published, your own is not, so the haul is yours to measure. The listing is published by Primary Forest Products Network (Southern Group of State Foresters); AXE USA republishes it as it stands and adds nothing to it.
Where it is
4022 FM 347 NorthJacksonville, TX 75766
- Town
- Jacksonville
- County
- Cherokee County, Texas
- ZIP
- 75766
- Published coordinates
- 31.86486, -95.23434
No contact published
Primary Forest Products Network (Southern Group of State Foresters) publishes this facility's location but no phone number, email, or website, and AXE USA does not fill that gap from anywhere else. The agency record linked below is the place to check for a number.
What this facility is
Veneer & plywood mill
A veneer and plywood plant peels or slices logs into thin sheets and presses them into panels. Veneer logs are graded hard on straightness, diameter and knots, so this is a quality market: a short butt log of the right form is worth more here than a truckload of pulpwood anywhere else.
What it takes
The record lists hardwood and softwood as the material it accepts.
No agency document says whether this facility is buying today, what it pays, the minimum load it will take, or how far it will haul. AXE USA does not check any mill's licence, insurance, ability, or whether it is still in business - this page republishes a public record and nothing more.
Reading this listing
What it means for your timber
The source goes no further than hardwood and softwood here, which is a starting point rather than a specification. The species guides take the trees one at a time - what each is cut for, how it is graded, and where the line between pulpwood and sawtimber falls.
It is one of 7 facilities listed in Cherokee County, which is where a search for a sawmill near me starts if your ground is in that county. The Cherokee County section of the state page has every one of them side by side, and all 106 Texas listings run across 44 counties - which is the map that decides whether a load leaves your gate for twenty minutes or two hours.
Anybody searching for a sawmill near me needs more than one gate. If this one will not take your wood, the nearest other listings are Texas Basket Company in Jacksonville, 7 miles away, Norbord Texas Ltd. in Nacogdoches, 40 miles away and Louisiana Pacific Corp. in Carthage, 56 miles away. Distances are straight lines between the coordinates the sources published - not road miles, and not a statement that anybody is buying.
None of this says whether the gate is open or what the load would fetch - no agency document records that. A price comes out of a sale run properly: the landowner's guide to selling timber takes the steps in the order they happen, and sealed bidding puts one tract in front of several buyers at once instead of taking the first number offered.
What else is listed around it
7
Listed facilities in Cherokee County
2
Of them run as a veneer & plywood mill
7mi
Straight line to the nearest other veneer & plywood mill
106
Listed facilities statewide
Across Cherokee County the sources list 4 sawmill listings, 2 veneer & plywood mill listings, 1 mulch plant, 1 other processor. A facility can be listed under more than one of those, so the numbers overlap rather than adding up.
Where this listing comes from
- Source document
- Primary Forest Products Network (Southern Group of State Foresters) (opens in a new tab)
- Edition
- Continuously maintained - the source publishes no edition date
- Fetched by AXE USA
- 2026-08-18
Fields are never merged between documents: every line above came from this one record, so a listing from a source that publishes no phone number stays without one.
Other mills in Cherokee County
Every other listed facility in Cherokee County, Texas.
- Arrington Lumber & Pallet Co.Jacksonville, Cherokee CountySawmill
- Cross-Cut HardwoodAlto, Cherokee CountySawmill
- M & H Crates, Inc.Jacksonville, Cherokee CountySawmill
- Natural Earth Technology, LLPRusk, Cherokee CountyMulch plant
- Texas Basket CompanyJacksonville, Cherokee CountyVeneer & plywood mill · Other processor
- Wilcox Timber & LumberRusk, Cherokee CountySawmill
Nearest Veneer & plywood mill listings in Texas
Ordered by straight-line distance from the coordinates the source published for Mc Cown Veneer - not by road miles, and not by who is buying.
- Texas Basket CompanyJacksonville, Cherokee CountyVeneer & plywood mill · Other processor7 mi
- Norbord Texas Ltd.Nacogdoches, Nacogdoches CountyVeneer & plywood mill40 mi
- Louisiana Pacific Corp.Carthage, Panola CountyVeneer & plywood mill56 mi
- Georgia PacificCorrigan, Polk CountyVeneer & plywood mill63 mi
- RoyOMartinCorrigan, Polk CountyVeneer & plywood mill66 mi
- Georgia PacificCamden, Polk CountyVeneer & plywood mill72 mi
This listing comes from an agency document. Mills close and move between publications. If you know this one is shut, has moved, or the number is wrong, tell us and we will check it.
Got timber to move in Cherokee County?
This listing says where Mc Cown Veneer is and what the agency records it as taking. It does not say what it will pay. Put the tract out for sealed bids and let the buyers around Jacksonville answer that themselves.