Polk County · Texas mill directory
Georgia Pacific
Veneer & plywood mill
Georgia Pacific is listed as a veneer and plywood plant at 20125 E FM 942, Camden, TX 75934, in Polk County. If you came looking for a veneer and plywood plant near me, this is the Camden end of that question: the address is published, your own is not, so the haul is yours to measure. The listing is published by Primary Forest Products Network (Southern Group of State Foresters); AXE USA republishes it as it stands and adds nothing to it.
Where it is
20125 E FM 942Camden, TX 75934
- Town
- Camden
- County
- Polk County, Texas
- ZIP
- 75934
- Published coordinates
- 30.91340, -94.73382
No contact published
Primary Forest Products Network (Southern Group of State Foresters) publishes this facility's location but no phone number, email, or website, and AXE USA does not fill that gap from anywhere else. The agency record linked below is the place to check for a number.
What this facility is
Veneer & plywood mill
A veneer and plywood plant peels or slices logs into thin sheets and presses them into panels. Veneer logs are graded hard on straightness, diameter and knots, so this is a quality market: a short butt log of the right form is worth more here than a truckload of pulpwood anywhere else.
What it takes
Softwood is the only material the source records this facility as accepting.
No agency document says whether this facility is buying today, what it pays, the minimum load it will take, or how far it will haul. AXE USA does not check any mill's licence, insurance, ability, or whether it is still in business - this page republishes a public record and nothing more.
Reading this listing
What it means for your timber
The source goes no further than softwood here, which is a starting point rather than a specification. The species guides take the trees one at a time - what each is cut for, how it is graded, and where the line between pulpwood and sawtimber falls.
It is one of 6 facilities listed in Polk County, which is where a search for a sawmill near me starts if your ground is in that county. The Polk County section of the state page has every one of them side by side, and all 106 Texas listings run across 44 counties - which is the map that decides whether a load leaves your gate for twenty minutes or two hours.
Anybody searching for a sawmill near me needs more than one gate. If this one will not take your wood, the nearest other listings are RoyOMartin in Corrigan, 8 miles away, Georgia Pacific in Corrigan, 9 miles away and Norbord Texas Ltd. in Nacogdoches, 46 miles away. Distances are straight lines between the coordinates the sources published - not road miles, and not a statement that anybody is buying.
None of this says whether the gate is open or what the load would fetch - no agency document records that. A price comes out of a sale run properly: the landowner's guide to selling timber takes the steps in the order they happen, and sealed bidding puts one tract in front of several buyers at once instead of taking the first number offered.
What else is listed around it
6
Listed facilities in Polk County
3
Of them run as a veneer & plywood mill
8mi
Straight line to the nearest other veneer & plywood mill
106
Listed facilities statewide
Across Polk County the sources list 3 veneer & plywood mill listings, 1 mulch plant, 1 sawmill. A facility can be listed under more than one of those, so the numbers overlap rather than adding up.
Where this listing comes from
- Source document
- Primary Forest Products Network (Southern Group of State Foresters) (opens in a new tab)
- Edition
- Continuously maintained - the source publishes no edition date
- Fetched by AXE USA
- 2026-08-18
Fields are never merged between documents: every line above came from this one record, so a listing from a source that publishes no phone number stays without one.
Other mills in Polk County
Every other listed facility in Polk County, Texas.
Nearest Veneer & plywood mill listings in Texas
Ordered by straight-line distance from the coordinates the source published for Georgia Pacific - not by road miles, and not by who is buying.
- RoyOMartinCorrigan, Polk CountyVeneer & plywood mill8 mi
- Georgia PacificCorrigan, Polk CountyVeneer & plywood mill9 mi
- Norbord Texas Ltd.Nacogdoches, Nacogdoches CountyVeneer & plywood mill46 mi
- Louisiana Pacific Corp.Jasper, Jasper CountyVeneer & plywood mill48 mi
- Mc Cown VeneerJacksonville, Cherokee CountyVeneer & plywood mill72 mi
- Texas Basket CompanyJacksonville, Cherokee CountyVeneer & plywood mill ยท Other processor79 mi
This listing comes from an agency document. Mills close and move between publications. If you know this one is shut, has moved, or the number is wrong, tell us and we will check it.
Got timber to move in Polk County?
This listing says where Georgia Pacific is and what the agency records it as taking. It does not say what it will pay. Put the tract out for sealed bids and let the buyers around Camden answer that themselves.