Haywood County · North Carolina mill directory
Suncrest, LLC
Chip mill
Suncrest, LLC is listed as a chip mill at 4595 Jonathan Creek Road, Waynesville, NC, in Haywood County. If you came looking for a chip mill near me, this is the Waynesville end of that question: the address is published, your own is not, so the haul is yours to measure. The listing is published by Primary Forest Products Network (Southern Group of State Foresters); AXE USA republishes it as it stands and adds nothing to it.
Where it is
4595 Jonathan Creek RoadWaynesville, NC
- Town
- Waynesville
- County
- Haywood County, North Carolina
- Published coordinates
- 35.58193, -83.01033
No contact published
Primary Forest Products Network (Southern Group of State Foresters) publishes this facility's location but no phone number, email, or website, and AXE USA does not fill that gap from anywhere else. The agency record linked below is the place to check for a number.
What this facility is
Chip mill
A chip mill has no saw line. Roundwood goes in whole and leaves as clean chips by truck or railcar for a pulp, paper or panel mill, which is why a chip mill takes the small stems, crooked wood and thinnings a grade sawmill turns down.
What it takes
The record lists hardwood and softwood as the material it accepts.
No agency document says whether this facility is buying today, what it pays, the minimum load it will take, or how far it will haul. AXE USA does not check any mill's licence, insurance, ability, or whether it is still in business - this page republishes a public record and nothing more.
Reading this listing
What it means for your timber
The source goes no further than hardwood and softwood here, which is a starting point rather than a specification. The species guides take the trees one at a time - what each is cut for, how it is graded, and where the line between pulpwood and sawtimber falls.
It is one of 10 facilities listed in Haywood County, which is where a search for a sawmill near me starts if your ground is in that county. The Haywood County section of the state page has every one of them side by side, and all 245 North Carolina listings run across 81 counties - which is the map that decides whether a load leaves your gate for twenty minutes or two hours.
Anybody searching for a sawmill near me needs more than one gate. If this one will not take your wood, the nearest other listings are Valwood Corp in Marble, 57 miles away, Bristol Industries, Inc. in Morganton, 65 miles away and Godfrey Lumber Co - Chip Mill in Statesville, 120 miles away. Distances are straight lines between the coordinates the sources published - not road miles, and not a statement that anybody is buying.
None of this says whether the gate is open or what the load would fetch - no agency document records that. A price comes out of a sale run properly: the landowner's guide to selling timber takes the steps in the order they happen, and sealed bidding puts one tract in front of several buyers at once instead of taking the first number offered.
What else is listed around it
10
Listed facilities in Haywood County
1
Of them run as a chip mill
57mi
Straight line to the nearest other chip mill
245
Listed facilities statewide
Across Haywood County the sources list 6 sawmill listings, 2 firewood listings, 1 chip mill, 1 pulp & paper mill. A facility can be listed under more than one of those, so the numbers overlap rather than adding up.
Where this listing comes from
- Source document
- Primary Forest Products Network (Southern Group of State Foresters) (opens in a new tab)
- Edition
- Continuously maintained - the source publishes no edition date
- Fetched by AXE USA
- 2026-08-18
Fields are never merged between documents: every line above came from this one record, so a listing from a source that publishes no phone number stays without one.
Other mills in Haywood County
Every other listed facility in Haywood County, North Carolina.
- Caldwell Trucking and Excavating, Inc.Waynesville, Haywood CountyFirewood
- Canton Sawmill, LLCCanton, Haywood CountySawmill
- East Fork Lumber Co.Canton, Haywood CountySawmill
- Evergreen Packaging GroupCanton, Haywood CountyPulp & paper mill
- Jay Creek TimbersWaynesville, Haywood CountySawmill
- Lumber Jill Firewood LLCCanton, Haywood CountyFirewood
- Page Sawmill & Forest Products, Inc.Waynesville, Haywood CountySawmill
- Poison Cove Pine MillClyde, Haywood CountySawmill
- Ridgeline Portable SawmillClyde, Haywood CountySawmill
Nearest Chip mill listings in North Carolina
Ordered by straight-line distance from the coordinates the source published for Suncrest, LLC - not by road miles, and not by who is buying.
- Valwood CorpMarble, Cherokee CountyChip mill57 mi
- Bristol Industries, Inc.Morganton, Burke CountyChip mill65 mi
- Godfrey Lumber Co - Chip MillStatesville, Iredell CountyChip mill120 mi
- Jordan Lumber & Supply, Inc. - Anson Wood Products, Inc.Wadesboro, Anson CountyChip mill171 mi
- Jordan Lumber & Supply, Inc. - Cotton Creek Chip Co., Inc.Star, Moore CountyChip mill186 mi
- Enviva Pellets Hamlet, LLCHamlet, Richmond CountyChip mill196 mi
This listing comes from an agency document. Mills close and move between publications. If you know this one is shut, has moved, or the number is wrong, tell us and we will check it.
Got timber to move in Haywood County?
This listing says where Suncrest, LLC is and what the agency records it as taking. It does not say what it will pay. Put the tract out for sealed bids and let the buyers around Waynesville answer that themselves.