Anson County · North Carolina mill directory
Jordan Lumber & Supply, Inc. - Anson Wood Products, Inc.
Chip mill
Jordan Lumber & Supply, Inc. - Anson Wood Products, Inc. is listed as a chip mill at 315 Parsons Street, Wadesboro, NC 28170, in Anson County. If you came looking for a chip mill near me, this is the Wadesboro end of that question: the address is published, your own is not, so the haul is yours to measure. The listing is published by Primary Forest Products Network (Southern Group of State Foresters); AXE USA republishes it as it stands and adds nothing to it.
Where it is
315 Parsons StreetWadesboro, NC 28170
- Town
- Wadesboro
- County
- Anson County, North Carolina
- ZIP
- 28170
- Published coordinates
- 34.97329, -80.06455
No contact published
Primary Forest Products Network (Southern Group of State Foresters) publishes this facility's location but no phone number, email, or website, and AXE USA does not fill that gap from anywhere else. The agency record linked below is the place to check for a number.
What this facility is
Chip mill
A chip mill has no saw line. Roundwood goes in whole and leaves as clean chips by truck or railcar for a pulp, paper or panel mill, which is why a chip mill takes the small stems, crooked wood and thinnings a grade sawmill turns down.
What it takes
The record lists hardwood and softwood as the material it accepts.
No agency document says whether this facility is buying today, what it pays, the minimum load it will take, or how far it will haul. AXE USA does not check any mill's licence, insurance, ability, or whether it is still in business - this page republishes a public record and nothing more.
Reading this listing
What it means for your timber
The source goes no further than hardwood and softwood here, which is a starting point rather than a specification. The species guides take the trees one at a time - what each is cut for, how it is graded, and where the line between pulpwood and sawtimber falls.
It is one of 2 facilities listed in Anson County, which is where a search for a sawmill near me starts if your ground is in that county. The Anson County section of the state page has every one of them side by side, and all 245 North Carolina listings run across 81 counties - which is the map that decides whether a load leaves your gate for twenty minutes or two hours.
Anybody searching for a sawmill near me needs more than one gate. If this one will not take your wood, the nearest other listings are Enviva Pellets Hamlet, LLC in Hamlet, 24 miles away, Jordan Lumber & Supply, Inc. - Cotton Creek Chip Co., Inc. in Star, 36 miles away and Godfrey Lumber Co - Chip Mill in Statesville, 71 miles away. Distances are straight lines between the coordinates the sources published - not road miles, and not a statement that anybody is buying.
None of this says whether the gate is open or what the load would fetch - no agency document records that. A price comes out of a sale run properly: the landowner's guide to selling timber takes the steps in the order they happen, and sealed bidding puts one tract in front of several buyers at once instead of taking the first number offered.
What else is listed around it
2
Listed facilities in Anson County
1
Of them run as a chip mill
24mi
Straight line to the nearest other chip mill
245
Listed facilities statewide
Across Anson County the sources list 1 chip mill, 1 sawmill. A facility can be listed under more than one of those, so the numbers overlap rather than adding up.
Where this listing comes from
- Source document
- Primary Forest Products Network (Southern Group of State Foresters) (opens in a new tab)
- Edition
- Continuously maintained - the source publishes no edition date
- Fetched by AXE USA
- 2026-08-18
Fields are never merged between documents: every line above came from this one record, so a listing from a source that publishes no phone number stays without one.
Other mills in Anson County
Every other listed facility in Anson County, North Carolina.
Nearest Chip mill listings in North Carolina
Ordered by straight-line distance from the coordinates the source published for Jordan Lumber & Supply, Inc. - Anson Wood Products, Inc. - not by road miles, and not by who is buying.
- Enviva Pellets Hamlet, LLCHamlet, Richmond CountyChip mill24 mi
- Jordan Lumber & Supply, Inc. - Cotton Creek Chip Co., Inc.Star, Moore CountyChip mill36 mi
- Godfrey Lumber Co - Chip MillStatesville, Iredell CountyChip mill71 mi
- Domtar Paper Co., LLC/Bonsal Chip MillNew Hill, Wake CountyChip mill77 mi
- Enviva Pellets Sampson, LLCFaison, Sampson CountyChip mill107 mi
- Bristol Industries, Inc.Morganton, Burke CountyChip mill113 mi
This listing comes from an agency document. Mills close and move between publications. If you know this one is shut, has moved, or the number is wrong, tell us and we will check it.
Got timber to move in Anson County?
This listing says where Jordan Lumber & Supply, Inc. - Anson Wood Products, Inc. is and what the agency records it as taking. It does not say what it will pay. Put the tract out for sealed bids and let the buyers around Wadesboro answer that themselves.