Anson County · North Carolina mill directory
Edwards Wood Prod Inc.-Peachland Mill
Sawmill
Edwards Wood Prod Inc.-Peachland Mill is listed as a sawmill at 160 Pulpwood Yard Rd., Peachland, NC 28133, in Anson County. If you came looking for a sawmill near me, this is the Peachland end of that question: the address is published, your own is not, so the haul is yours to measure. The listing is published by Primary Forest Products Network (Southern Group of State Foresters); AXE USA republishes it as it stands and adds nothing to it.
Where it is
160 Pulpwood Yard Rd.Peachland, NC 28133
- Town
- Peachland
- County
- Anson County, North Carolina
- ZIP
- 28133
- Published coordinates
- 34.99247, -80.29443
No contact published
Primary Forest Products Network (Southern Group of State Foresters) publishes this facility's location but no phone number, email, or website, and AXE USA does not fill that gap from anywhere else. The agency record linked below is the place to check for a number.
What this facility is
Sawmill
A sawmill breaks logs down into boards. Sawlogs are graded on diameter, straightness and defect before they reach the headrig, so this is the outlet that pays for stem quality rather than tonnage - and the slabs, edgings and sawdust it makes are what feed the chip, shavings and mulch trade around it.
What it takes
The record lists hardwood and softwood as the material it accepts.
No agency document says whether this facility is buying today, what it pays, the minimum load it will take, or how far it will haul. AXE USA does not check any mill's licence, insurance, ability, or whether it is still in business - this page republishes a public record and nothing more.
Reading this listing
What it means for your timber
The source goes no further than hardwood and softwood here, which is a starting point rather than a specification. The species guides take the trees one at a time - what each is cut for, how it is graded, and where the line between pulpwood and sawtimber falls.
It is one of 2 facilities listed in Anson County, which is where a search for a sawmill near me starts if your ground is in that county. The Anson County section of the state page has every one of them side by side, and all 245 North Carolina listings run across 81 counties - which is the map that decides whether a load leaves your gate for twenty minutes or two hours.
Anybody searching for a sawmill near me needs more than one gate. If this one will not take your wood, the nearest other listings are Edwards Wood Prod Inc.-Marshville Mill in Marshville, 3 miles away, Jordan Lumber & Supply, Inc. - Mt. Gilead Sawmill in Mt. Gilead, 26 miles away and Roten Tie & Timber, Inc. in Albemarle, 26 miles away. Distances are straight lines between the coordinates the sources published - not road miles, and not a statement that anybody is buying.
None of this says whether the gate is open or what the load would fetch - no agency document records that. A price comes out of a sale run properly: the landowner's guide to selling timber takes the steps in the order they happen, and sealed bidding puts one tract in front of several buyers at once instead of taking the first number offered.
What else is listed around it
2
Listed facilities in Anson County
1
Of them run as a sawmill
3mi
Straight line to the nearest other sawmill
245
Listed facilities statewide
Across Anson County the sources list 1 chip mill, 1 sawmill. A facility can be listed under more than one of those, so the numbers overlap rather than adding up.
Where this listing comes from
- Source document
- Primary Forest Products Network (Southern Group of State Foresters) (opens in a new tab)
- Edition
- Continuously maintained - the source publishes no edition date
- Fetched by AXE USA
- 2026-08-18
Fields are never merged between documents: every line above came from this one record, so a listing from a source that publishes no phone number stays without one.
Other mills in Anson County
Every other listed facility in Anson County, North Carolina.
Nearest Sawmill listings in North Carolina
Ordered by straight-line distance from the coordinates the source published for Edwards Wood Prod Inc.-Peachland Mill - not by road miles, and not by who is buying.
- Edwards Wood Prod Inc.-Marshville MillMarshville, Union CountySawmill3 mi
- Jordan Lumber & Supply, Inc. - Mt. Gilead SawmillMt. Gilead, Montgomery CountySawmill26 mi
- Roten Tie & Timber, Inc.Albemarle, Stanly CountySawmill26 mi
- Piedmont Hardwood Lumber Co.Mount Pleasant, Cabarrus CountySawmill30 mi
- H. W. Culp Lumber Co., Inc.New London, Stanly CountySawmill32 mi
- Carolina Urban Lumber, LLCPineville, Mecklenburg CountySawmill34 mi
This listing comes from an agency document. Mills close and move between publications. If you know this one is shut, has moved, or the number is wrong, tell us and we will check it.
Got timber to move in Anson County?
This listing says where Edwards Wood Prod Inc.-Peachland Mill is and what the agency records it as taking. It does not say what it will pay. Put the tract out for sealed bids and let the buyers around Peachland answer that themselves.