Address: 1683 Barefoot Rd., Newton Grove, NC 28366
Species accepted
HardwoodSoftwood
Listing from public records
Primary Forest Products Network (Southern Group of State Foresters)Fetched 18 August 2026
North Carolina · Timber buyers & mill directory
Sawmills inSampson County
3 primary wood processors are listed in Sampson County, North Carolina. The mix is 1 chip mill, 1 sawmill and 1 shavings mill. The addresses run to Clinton, Faison and Newton Grove. If you came looking for a sawmill near me, this is the Sampson County end of that question: every address below is published, yours is not, so the haul is yours to measure.
- Facilities
- 3
- Towns
- 3
- Species named
- 2
- With a phone
- 0
What Sampson County buys
The Sampson County records name 2 materials between them - hardwood and softwood - with hardwood on 2 of the 3 listings.
Every line above is counted off the 3 agency records listed below and nothing else. No document says whether any of these gates is buying today, what it pays, or how far it will haul.
Species accepted, and how many listings name each
- Hardwood2
- Softwood2
Every listing in Sampson County
Alphabetical, nothing held back on a second page. Every listing in Sampson County has a page of its own - click a name for its address, what it takes, and the mills nearest to it.
Address: 5 Connector Rd, Faison, NC 28341
Species accepted
HardwoodListing from public records
Primary Forest Products Network (Southern Group of State Foresters)Fetched 18 August 2026Address: 8100 Hobbton Hwy, Clinton, NC 28328
Species accepted
SoftwoodListing from public records
Primary Forest Products Network (Southern Group of State Foresters)Fetched 18 August 2026
Towns on these records: Clinton, Faison, Newton Grove. The town is the closest this page can put a gate to your own ground - nothing here knows where you are standing, and a directory that guessed would be inventing the one fact that decides a haul.
Selling timber in Sampson County
Hardwood is named on more of these Sampson County records than anything else, and species decides more of what a load is worth than the gate it goes through. The sources here go no further than that, which is a starting point rather than a specification. The species guides take the trees one at a time - what each is cut for, how it is graded, and where the line between pulpwood and sawtimber falls.
These 3 listings are 1% of everything the North Carolina sources publish, concentrated in one county. A mill does not care which line your ground sits behind, so read outward: all 245 North Carolina listings cover 81 counties, 45 of which carry enough listings for a page of their own.
None of this says whether a gate in Sampson County is open or what a load would fetch - no agency document records that. A price comes out of a sale run properly: the landowner's guide to selling timber takes the steps in the order they happen, sealed bidding puts one tract in front of several buyers at once instead of taking the first number offered, and a consulting forester runs the whole thing for you if you would rather not.
Counties next to Sampson
The nearest counties with a list of their own, ordered by the straight-line distance between the mills' published coordinates. Straight lines, not road miles - and a gate one county over is often still the closest one to your gate.
- Wayne County18 miles from the Sampson mills5
- Johnston County22 miles from the Sampson mills5
- Bladen County42 miles from the Sampson mills3
- Columbus County45 miles from the Sampson mills5
- Wake County46 miles from the Sampson mills6
- Chatham County60 miles from the Sampson mills7
Where these Sampson County listings come from
Fetched 2026-08-18. Fields are never merged between documents, so a listing from a source with no phone number stays without one, and AXE USA has not contacted, checked or verified any business on this page.