American Wood Fibre, Inc.
Chip mill
Checked 2026
Address: AL
Species accepted
Listing from public records
Primary Forest Products Network (Southern Group of State Foresters)Fetched 18 August 2026
Alabama · Timber buyers & mill directory
3 primary wood processors are listed in Montgomery County, Alabama. The mix is 2 veneer and plywood plants and 1 chip mill. The addresses run to Montgomery. If you came looking for a sawmill near me, this is the Montgomery County end of that question: every address below is published, yours is not, so the haul is yours to measure.
The Montgomery County records name 2 materials between them - hardwood and softwood - with hardwood on 3 of the 3 listings.
Every line above is counted off the 3 agency records listed below and nothing else. No document says whether any of these gates is buying today, what it pays, or how far it will haul.
Species accepted, and how many listings name each
Alphabetical, nothing held back on a second page. 1 of these 3 listings have a page of their own - click a name for its address, what it takes, and the mills nearest to it. The other 2 were published without a street address, so everything known about them is on the card.
Chip mill
Checked 2026
Address: AL
Species accepted
Listing from public records
Primary Forest Products Network (Southern Group of State Foresters)Fetched 18 August 2026
Veneer & plywood mill
Checked 2026
Address: AL
Species accepted
Listing from public records
Primary Forest Products Network (Southern Group of State Foresters)Fetched 18 August 2026
Address: 2550 Jackson Ferry Road, Montgomery, AL 36104
Species accepted
Listing from public records
Primary Forest Products Network (Southern Group of State Foresters)Fetched 18 August 2026
Towns on these records: Montgomery. The town is the closest this page can put a gate to your own ground - nothing here knows where you are standing, and a directory that guessed would be inventing the one fact that decides a haul.
Hardwood is named on more of these Montgomery County records than anything else, and species decides more of what a load is worth than the gate it goes through. The sources here go no further than that, which is a starting point rather than a specification. The species guides take the trees one at a time - what each is cut for, how it is graded, and where the line between pulpwood and sawtimber falls.
These 3 listings are 2% of everything the Alabama sources publish, concentrated in one county. A mill does not care which line your ground sits behind, so read outward: all 154 Alabama listings cover 57 counties, 21 of which carry enough listings for a page of their own.
None of this says whether a gate in Montgomery County is open or what a load would fetch - no agency document records that. A price comes out of a sale run properly: the landowner's guide to selling timber takes the steps in the order they happen, sealed bidding puts one tract in front of several buyers at once instead of taking the first number offered, and a consulting forester runs the whole thing for you if you would rather not.
The nearest counties with a list of their own, ordered by the straight-line distance between the mills' published coordinates. Straight lines, not road miles - and a gate one county over is often still the closest one to your gate.
Fetched 2026-08-18. Fields are never merged between documents, so a listing from a source with no phone number stays without one, and AXE USA has not contacted, checked or verified any business on this page.