Randolph County · North Carolina mill directory
Donald Henley & Sons Sawmill
Sawmill
Donald Henley & Sons Sawmill is listed as a sawmill at 2351 Old Cedar Fall Rd, Asheboro, NC 27203, in Randolph County. If you came looking for a sawmill near me, this is the Asheboro end of that question: the address is published, your own is not, so the haul is yours to measure. The listing is published by Primary Forest Products Network (Southern Group of State Foresters); AXE USA republishes it as it stands and adds nothing to it.
Where it is
2351 Old Cedar Fall RdAsheboro, NC 27203
- Town
- Asheboro
- County
- Randolph County, North Carolina
- ZIP
- 27203
- Published coordinates
- 35.72778, -79.77406
No contact published
Primary Forest Products Network (Southern Group of State Foresters) publishes this facility's location but no phone number, email, or website, and AXE USA does not fill that gap from anywhere else. The agency record linked below is the place to check for a number.
What this facility is
Sawmill
A sawmill breaks logs down into boards. Sawlogs are graded on diameter, straightness and defect before they reach the headrig, so this is the outlet that pays for stem quality rather than tonnage - and the slabs, edgings and sawdust it makes are what feed the chip, shavings and mulch trade around it.
What it takes
The record lists hardwood and softwood as the material it accepts.
No agency document says whether this facility is buying today, what it pays, the minimum load it will take, or how far it will haul. AXE USA does not check any mill's licence, insurance, ability, or whether it is still in business - this page republishes a public record and nothing more.
Reading this listing
What it means for your timber
The source goes no further than hardwood and softwood here, which is a starting point rather than a specification. The species guides take the trees one at a time - what each is cut for, how it is graded, and where the line between pulpwood and sawtimber falls.
It is one of 7 facilities listed in Randolph County, which is where a search for a sawmill near me starts if your ground is in that county. The Randolph County section of the state page has every one of them side by side, and all 245 North Carolina listings run across 81 counties - which is the map that decides whether a load leaves your gate for twenty minutes or two hours.
Anybody searching for a sawmill near me needs more than one gate. If this one will not take your wood, the nearest other listings are McDowell Lumber Co., Inc. in Asheboro, 11 miles away, Creative Construction & Portable Sawmill Service, LLC in Asheboro, 11 miles away and Tram Lumber, LLC in Asheboro, 12 miles away. Distances are straight lines between the coordinates the sources published - not road miles, and not a statement that anybody is buying.
None of this says whether the gate is open or what the load would fetch - no agency document records that. A price comes out of a sale run properly: the landowner's guide to selling timber takes the steps in the order they happen, and sealed bidding puts one tract in front of several buyers at once instead of taking the first number offered.
What else is listed around it
7
Listed facilities in Randolph County
6
Of them run as a sawmill
11mi
Straight line to the nearest other sawmill
245
Listed facilities statewide
Across Randolph County the sources list 6 sawmill listings, 1 veneer & plywood mill. A facility can be listed under more than one of those, so the numbers overlap rather than adding up.
Where this listing comes from
- Source document
- Primary Forest Products Network (Southern Group of State Foresters) (opens in a new tab)
- Edition
- Continuously maintained - the source publishes no edition date
- Fetched by AXE USA
- 2026-08-18
Fields are never merged between documents: every line above came from this one record, so a listing from a source that publishes no phone number stays without one.
Other mills in Randolph County
Every other listed facility in Randolph County, North Carolina.
- Creative Construction & Portable Sawmill Service, LLCAsheboro, Randolph CountySawmill
- Grubb & Son Sawmill, LLCTrinity, Randolph CountySawmill
- Jones & Ritter Sawmill, Inc.Bennett, Randolph CountySawmill
- McDowell Lumber Co., Inc.Asheboro, Randolph CountySawmill
- Quality Veneer CompanyLiberty, Randolph CountyVeneer & plywood mill
- Tram Lumber, LLCAsheboro, Randolph CountySawmill
Nearest Sawmill listings in North Carolina
Ordered by straight-line distance from the coordinates the source published for Donald Henley & Sons Sawmill - not by road miles, and not by who is buying.
- McDowell Lumber Co., Inc.Asheboro, Randolph CountySawmill11 mi
- Creative Construction & Portable Sawmill Service, LLCAsheboro, Randolph CountySawmill11 mi
- Tram Lumber, LLCAsheboro, Randolph CountySawmill12 mi
- Grubb & Son Sawmill, LLCTrinity, Randolph CountySawmill14 mi
- Edwards Wood Prod Inc.-Alamance MillLiberty, Alamance CountySawmill16 mi
- Jones & Ritter Sawmill, Inc.Bennett, Randolph CountySawmill17 mi
This listing comes from an agency document. Mills close and move between publications. If you know this one is shut, has moved, or the number is wrong, tell us and we will check it.
Got timber to move in Randolph County?
This listing says where Donald Henley & Sons Sawmill is and what the agency records it as taking. It does not say what it will pay. Put the tract out for sealed bids and let the buyers around Asheboro answer that themselves.