Chatham County · North Carolina mill directory
Arauco North America, Inc. / Arauco Panels USA, LLC
Veneer & plywood mill
Arauco North America, Inc. / Arauco Panels USA, LLC is listed as a veneer and plywood plant at 985 Corinth Rd, Moncure, NC 27559, in Chatham County. If you came looking for a veneer and plywood plant near me, this is the Moncure end of that question: the address is published, your own is not, so the haul is yours to measure. The listing is published by Primary Forest Products Network (Southern Group of State Foresters); AXE USA republishes it as it stands and adds nothing to it.
Where it is
985 Corinth RdMoncure, NC 27559
- Town
- Moncure
- County
- Chatham County, North Carolina
- ZIP
- 27559
- Published coordinates
- 35.60113, -79.04641
No contact published
Primary Forest Products Network (Southern Group of State Foresters) publishes this facility's location but no phone number, email, or website, and AXE USA does not fill that gap from anywhere else. The agency record linked below is the place to check for a number.
What this facility is
Veneer & plywood mill
A veneer and plywood plant peels or slices logs into thin sheets and presses them into panels. Veneer logs are graded hard on straightness, diameter and knots, so this is a quality market: a short butt log of the right form is worth more here than a truckload of pulpwood anywhere else.
What it takes
The record lists hardwood and softwood as the material it accepts.
No agency document says whether this facility is buying today, what it pays, the minimum load it will take, or how far it will haul. AXE USA does not check any mill's licence, insurance, ability, or whether it is still in business - this page republishes a public record and nothing more.
Reading this listing
What it means for your timber
The source goes no further than hardwood and softwood here, which is a starting point rather than a specification. The species guides take the trees one at a time - what each is cut for, how it is graded, and where the line between pulpwood and sawtimber falls.
It is one of 7 facilities listed in Chatham County, which is where a search for a sawmill near me starts if your ground is in that county. The Chatham County section of the state page has every one of them side by side, and all 245 North Carolina listings run across 81 counties - which is the map that decides whether a load leaves your gate for twenty minutes or two hours.
Anybody searching for a sawmill near me needs more than one gate. If this one will not take your wood, the nearest other listings are Southern Veneer Specialty Products, LLC in Moncure, under a mile away, Quality Veneer Company in Liberty, 34 miles away and Franklin Veneers Inc. in Franklinton, 49 miles away. Distances are straight lines between the coordinates the sources published - not road miles, and not a statement that anybody is buying.
None of this says whether the gate is open or what the load would fetch - no agency document records that. A price comes out of a sale run properly: the landowner's guide to selling timber takes the steps in the order they happen, and sealed bidding puts one tract in front of several buyers at once instead of taking the first number offered.
What else is listed around it
7
Listed facilities in Chatham County
2
Of them run as a veneer & plywood mill
1mi
Straight line to the nearest other veneer & plywood mill
245
Listed facilities statewide
Across Chatham County the sources list 4 sawmill listings, 2 veneer & plywood mill listings, 1 post & pole plant. A facility can be listed under more than one of those, so the numbers overlap rather than adding up.
Where this listing comes from
- Source document
- Primary Forest Products Network (Southern Group of State Foresters) (opens in a new tab)
- Edition
- Continuously maintained - the source publishes no edition date
- Fetched by AXE USA
- 2026-08-18
Fields are never merged between documents: every line above came from this one record, so a listing from a source that publishes no phone number stays without one.
Other mills in Chatham County
Every other listed facility in Chatham County, North Carolina.
- Carolina Lumber Enterprises, Inc.Siler City, Chatham CountySawmill
- Carolina Wood Enterprises, Inc.Moncure, Chatham CountySawmill
- Elkins Sawmill, Inc.Moncure, Chatham CountySawmill
- General Timber, Inc.Sanford, Chatham CountyPost & pole plant
- Horse Branch SawmillBear Creek, Chatham CountySawmill
- Southern Veneer Specialty Products, LLCMoncure, Chatham CountyVeneer & plywood mill
Nearest Veneer & plywood mill listings in North Carolina
Ordered by straight-line distance from the coordinates the source published for Arauco North America, Inc. / Arauco Panels USA, LLC - not by road miles, and not by who is buying.
- Southern Veneer Specialty Products, LLCMoncure, Chatham CountyVeneer & plywood mill<1 mi
- Quality Veneer CompanyLiberty, Randolph CountyVeneer & plywood mill34 mi
- Franklin Veneers Inc.Franklinton, Franklin CountyVeneer & plywood mill49 mi
- Georgia-Pacific Corp/Dudley-PlywoodDudley, Wayne CountyVeneer & plywood mill62 mi
- Louisiana-Pacific Corp (Roxboro)Roxboro, Person CountyVeneer & plywood mill64 mi
- Elberta Crate & Box Co., Inc.Warrenton, Warren CountyVeneer & plywood mill75 mi
This listing comes from an agency document. Mills close and move between publications. If you know this one is shut, has moved, or the number is wrong, tell us and we will check it.
Got timber to move in Chatham County?
This listing says where Arauco North America, Inc. / Arauco Panels USA, LLC is and what the agency records it as taking. It does not say what it will pay. Put the tract out for sealed bids and let the buyers around Moncure answer that themselves.