Winston County · Mississippi mill directory
Winston Plywood and Veneer
Veneer & plywood mill
Winston Plywood and Veneer is listed as a veneer and plywood plant at 1160 Church Street, Louisville, MS 39339, in Winston County. If you came looking for a veneer and plywood plant near me, this is the Louisville end of that question: the address is published, your own is not, so the haul is yours to measure. The listing is published by Mississippi Forest Industry Directory (Mississippi Forestry Commission); AXE USA republishes it as it stands and adds nothing to it.
Where it is
1160 Church StreetLouisville, MS 39339
- Town
- Louisville
- County
- Winston County, Mississippi
- ZIP
- 39339
- Published coordinates
- 33.10468, -89.05765
No contact published
Mississippi Forest Industry Directory (Mississippi Forestry Commission) publishes this facility's location but no phone number, email, or website, and AXE USA does not fill that gap from anywhere else. The agency record linked below is the place to check for a number.
What this facility is
Veneer & plywood mill
A veneer and plywood plant peels or slices logs into thin sheets and presses them into panels. Veneer logs are graded hard on straightness, diameter and knots, so this is a quality market: a short butt log of the right form is worth more here than a truckload of pulpwood anywhere else.
What it takes
Softwood is the only material the source records this facility as accepting.
No agency document says whether this facility is buying today, what it pays, the minimum load it will take, or how far it will haul. AXE USA does not check any mill's licence, insurance, ability, or whether it is still in business - this page republishes a public record and nothing more.
Reading this listing
What it means for your timber
The source goes no further than softwood here, which is a starting point rather than a specification. The species guides take the trees one at a time - what each is cut for, how it is graded, and where the line between pulpwood and sawtimber falls.
It is one of 3 facilities listed in Winston County, which is where a search for a sawmill near me starts if your ground is in that county. The Winston County section of the state page has every one of them side by side, and all 124 Mississippi listings run across 50 counties - which is the map that decides whether a load leaves your gate for twenty minutes or two hours.
Anybody searching for a sawmill near me needs more than one gate. If this one will not take your wood, the nearest other listings are GP - Taylorsville Plywood in Taylorsville, 91 miles away, Scotch Plywood of Miss. in Waynesboro, 103 miles away and Quality Plywood Co in Waynesboro, 104 miles away. Distances are straight lines between the coordinates the sources published - not road miles, and not a statement that anybody is buying.
None of this says whether the gate is open or what the load would fetch - no agency document records that. A price comes out of a sale run properly: the landowner's guide to selling timber takes the steps in the order they happen, and sealed bidding puts one tract in front of several buyers at once instead of taking the first number offered.
What else is listed around it
3
Listed facilities in Winston County
1
Of them run as a veneer & plywood mill
91mi
Straight line to the nearest other veneer & plywood mill
124
Listed facilities statewide
Across Winston County the sources list 1 chip mill, 1 sawmill, 1 veneer & plywood mill. A facility can be listed under more than one of those, so the numbers overlap rather than adding up.
Where this listing comes from
- Source document
- Mississippi Forest Industry Directory (Mississippi Forestry Commission) (opens in a new tab)
- Edition
- March 2024
- Fetched by AXE USA
- 2026-08-18
Fields are never merged between documents: every line above came from this one record, so a listing from a source that publishes no phone number stays without one.
Other mills in Winston County
Every other listed facility in Winston County, Mississippi.
Nearest Veneer & plywood mill listings in Mississippi
Ordered by straight-line distance from the coordinates the source published for Winston Plywood and Veneer - not by road miles, and not by who is buying.
- GP - Taylorsville PlywoodTaylorsville, Smith CountyVeneer & plywood mill91 mi
- Scotch Plywood of Miss.Waynesboro, Wayne CountyVeneer & plywood mill103 mi
- Quality Plywood CoWaynesboro, Wayne CountyVeneer & plywood mill104 mi
- Hood IndustriesBeaumont, Perry CountyVeneer & plywood mill133 mi
- Hood Industries, Inc.-WigginsWiggins, Stone CountyVeneer & plywood mill157 mi
This listing comes from an agency document. Mills close and move between publications. If you know this one is shut, has moved, or the number is wrong, tell us and we will check it.
Got timber to move in Winston County?
This listing says where Winston Plywood and Veneer is and what the agency records it as taking. It does not say what it will pay. Put the tract out for sealed bids and let the buyers around Louisville answer that themselves.