Alcona County · Michigan mill directory
S & S Wood Products
Sawmill
S & S Wood Products is listed as a sawmill at 1147 N. Richardson Rd., Barton City, MI 48705, in Alcona County. If you came looking for a sawmill near me, this is the Barton City end of that question: the address is published, your own is not, so the haul is yours to measure. The listing is published by Michigan Forest Products Mill Data (Michigan Department of Natural Resources); AXE USA republishes it as it stands and adds nothing to it.
Where it is
1147 N. Richardson Rd.Barton City, MI 48705
- Town
- Barton City
- County
- Alcona County, Michigan
- ZIP
- 48705
- Published coordinates
- 44.68516, -83.60634
No contact published
Michigan Forest Products Mill Data (Michigan Department of Natural Resources) publishes this facility's location but no phone number, email, or website, and AXE USA does not fill that gap from anywhere else. The agency record linked below is the place to check for a number.
What this facility is
Sawmill
A sawmill breaks logs down into boards. Sawlogs are graded on diameter, straightness and defect before they reach the headrig, so this is the outlet that pays for stem quality rather than tonnage - and the slabs, edgings and sawdust it makes are what feed the chip, shavings and mulch trade around it.
What it takes
The record lists hardwood and softwood as the material it accepts.
What comes off it
The source names 2 product lines coming off this site: crossties and rough lumber.
No agency document says whether this facility is buying today, what it pays, the minimum load it will take, or how far it will haul. AXE USA does not check any mill's licence, insurance, ability, or whether it is still in business - this page republishes a public record and nothing more.
Reading this listing
What it means for your timber
The source goes no further than hardwood and softwood here, which is a starting point rather than a specification. The species guides take the trees one at a time - what each is cut for, how it is graded, and where the line between pulpwood and sawtimber falls.
It is one of 2 facilities listed in Alcona County, which is where a search for a sawmill near me starts if your ground is in that county. The Alcona County section of the state page has every one of them side by side, and all 302 Michigan listings run across 73 counties - which is the map that decides whether a load leaves your gate for twenty minutes or two hours.
Anybody searching for a sawmill near me needs more than one gate. If this one will not take your wood, the nearest other listings are McGuire Mill and Lumber in Glennie, 11 miles away, Fair and Square in Hubbard Lake, 14 miles away and Lakeside Lumber in Ossineke, 17 miles away. Distances are straight lines between the coordinates the sources published - not road miles, and not a statement that anybody is buying.
None of this says whether the gate is open or what the load would fetch - no agency document records that. A price comes out of a sale run properly: the landowner's guide to selling timber takes the steps in the order they happen, and sealed bidding puts one tract in front of several buyers at once instead of taking the first number offered.
What else is listed around it
2
Listed facilities in Alcona County
2
Of them run as a sawmill
11mi
Straight line to the nearest other sawmill
302
Listed facilities statewide
Across Alcona County the sources list 2 sawmill listings. A facility can be listed under more than one of those, so the numbers overlap rather than adding up.
Where this listing comes from
- Source document
- Michigan Forest Products Mill Data (Michigan Department of Natural Resources) (opens in a new tab)
- Edition
- February 2025
- Fetched by AXE USA
- 2026-08-18
Fields are never merged between documents: every line above came from this one record, so a listing from a source that publishes no phone number stays without one.
Other mills in Alcona County
Every other listed facility in Alcona County, Michigan.
Nearest Sawmill listings in Michigan
Ordered by straight-line distance from the coordinates the source published for S & S Wood Products - not by road miles, and not by who is buying.
- McGuire Mill and LumberGlennie, Alcona CountySawmill11 mi
- Fair and SquareHubbard Lake, Alpena CountySawmill14 mi
- Lakeside LumberOssineke, Alpena CountySawmill17 mi
- Bugg SawmillFairview, Oscoda CountySawmill19 mi
- Matthews MillSouth Branch, Iosco CountySawmill21 mi
- Johncock Forestry Products, Inc.South Branch, Ogemaw CountySawmill21 mi
This listing comes from an agency document. Mills close and move between publications. If you know this one is shut, has moved, or the number is wrong, tell us and we will check it.
Got timber to move in Alcona County?
This listing says where S & S Wood Products is and what the agency records it as taking. It does not say what it will pay. Put the tract out for sealed bids and let the buyers around Barton City answer that themselves.