Dickinson County · Michigan mill directory
Louisiana Pacific Corporation (Sagola)
Particle board plant · Veneer & plywood mill
Louisiana Pacific Corporation (Sagola) is listed as a particle board plant and a veneer and plywood plant at N8504 M-95, Sagola, MI 49881, in Dickinson County. If you came looking for a particle board plant near me, this is the Sagola end of that question: the address is published, your own is not, so the haul is yours to measure. The listing is published by Michigan Forest Products Mill Data (Michigan Department of Natural Resources); AXE USA republishes it as it stands and adds nothing to it.
Where it is
N8504 M-95Sagola, MI 49881
- Town
- Sagola
- County
- Dickinson County, Michigan
- ZIP
- 49881
- Published coordinates
- 46.03855, -88.06151
How to reach it
- Phone906-542-7101
- Websitelpcorp.com (opens in a new tab)
What this facility is
Particle board plant
A particle board plant presses wood particles into panel stock, so it buys mill residue - chips, shavings, sawdust - as readily as roundwood, and often sits close to the sawmills producing them.
Veneer & plywood mill
A veneer and plywood plant peels or slices logs into thin sheets and presses them into panels. Veneer logs are graded hard on straightness, diameter and knots, so this is a quality market: a short butt log of the right form is worth more here than a truckload of pulpwood anywhere else.
What it takes
Hardwood is the only material the source records this facility as accepting.
What comes off it
The source names 3 product lines coming off this site: lumber, particleboard and siding.
No agency document says whether this facility is buying today, what it pays, the minimum load it will take, or how far it will haul. AXE USA does not check any mill's licence, insurance, ability, or whether it is still in business - this page republishes a public record and nothing more.
Reading this listing
What it means for your timber
The source goes no further than hardwood here, which is a starting point rather than a specification. The species guides take the trees one at a time - what each is cut for, how it is graded, and where the line between pulpwood and sawtimber falls.
It is one of 3 facilities listed in Dickinson County, which is where a search for a sawmill near me starts if your ground is in that county. The Dickinson County section of the state page has every one of them side by side, and all 302 Michigan listings run across 73 counties - which is the map that decides whether a load leaves your gate for twenty minutes or two hours.
Anybody searching for a sawmill near me needs more than one gate. If this one will not take your wood, the nearest other listings are Anthony and Company, Inc. in Escanaba, 51 miles away, Timber Products Company (Veneer Mill) in Munising, 77 miles away and Bessemer Plywood Corp in Bessemer, 100 miles away. Distances are straight lines between the coordinates the sources published - not road miles, and not a statement that anybody is buying.
None of this says whether the gate is open or what the load would fetch - no agency document records that. A price comes out of a sale run properly: the landowner's guide to selling timber takes the steps in the order they happen, and sealed bidding puts one tract in front of several buyers at once instead of taking the first number offered.
What else is listed around it
3
Listed facilities in Dickinson County
1
Of them run as a particle board plant
100mi
Straight line to the nearest other particle board plant
302
Listed facilities statewide
Across Dickinson County the sources list 1 particle board plant, 1 pulp & paper mill, 1 sawmill, 1 veneer & plywood mill. A facility can be listed under more than one of those, so the numbers overlap rather than adding up.
Where this listing comes from
- Source document
- Michigan Forest Products Mill Data (Michigan Department of Natural Resources) (opens in a new tab)
- Edition
- February 2025
- Fetched by AXE USA
- 2026-08-18
Fields are never merged between documents: every line above came from this one record, so a listing from a source that publishes no phone number stays without one.
Other mills in Dickinson County
Every other listed facility in Dickinson County, Michigan.
Nearest Particle board plant listings in Michigan
Ordered by straight-line distance from the coordinates the source published for Louisiana Pacific Corporation (Sagola) - not by road miles, and not by who is buying.
- Bessemer Plywood CorpBessemer, Gogebic CountyParticle board plant · Veneer & plywood mill100 mi
- Louisiana Pacifc Corporation (Newberry)Newberry, Luce CountyParticle board plant · Veneer & plywood mill125 mi
- Weyerhaeuser Company (Grayling)Grayling, Crawford CountyParticle board plant · Veneer & plywood mill192 mi
- Arauco North America, Inc.Grayling, Crawford CountyParticle board plant · Veneer & plywood mill192 mi
Nearest Veneer & plywood mill listings in Michigan
Ordered by straight-line distance from the coordinates the source published for Louisiana Pacific Corporation (Sagola) - not by road miles, and not by who is buying.
- Anthony and Company, Inc.Escanaba, Delta CountyVeneer & plywood mill51 mi
- Timber Products Company (Veneer Mill)Munising, Alger CountyVeneer & plywood mill77 mi
- Bessemer Plywood CorpBessemer, Gogebic CountyParticle board plant · Veneer & plywood mill100 mi
- Louisiana Pacifc Corporation (Newberry)Newberry, Luce CountyParticle board plant · Veneer & plywood mill125 mi
- Manthei Wood ProductsPetoskey, Emmet CountyVeneer & plywood mill154 mi
- Weyerhaeuser Company (Grayling)Grayling, Crawford CountyParticle board plant · Veneer & plywood mill192 mi
This listing comes from an agency document. Mills close and move between publications. If you know this one is shut, has moved, or the number is wrong, tell us and we will check it.
Got timber to move in Dickinson County?
This listing says where Louisiana Pacific Corporation (Sagola) is and what the agency records it as taking. It does not say what it will pay. Put the tract out for sealed bids and let the buyers around Sagola answer that themselves.