Washington Parish · Louisiana mill directory

Joe N. Miles & Sons, LLC

Chip mill

Joe N. Miles & Sons, LLC is listed as a chip mill at 21501 LA-21, Bogalusa, LA 70427, in Washington Parish. If you came looking for a chip mill near me, this is the Bogalusa end of that question: the address is published, your own is not, so the haul is yours to measure. The listing is published by Location of Mills in Louisiana (LSU AgCenter); AXE USA republishes it as it stands and adds nothing to it.

Where it is

21501 LA-21
Bogalusa, LA 70427
Town
Bogalusa
Parish
Washington Parish, Louisiana
ZIP
70427
Published coordinates
30.83349, -89.84710

No contact published

Location of Mills in Louisiana (LSU AgCenter) publishes this facility's location but no phone number, email, or website, and AXE USA does not fill that gap from anywhere else. The agency record linked below is the place to check for a number.

What this facility is

Chip mill

A chip mill has no saw line. Roundwood goes in whole and leaves as clean chips by truck or railcar for a pulp, paper or panel mill, which is why a chip mill takes the small stems, crooked wood and thinnings a grade sawmill turns down.

No agency document says whether this facility is buying today, what it pays, the minimum load it will take, or how far it will haul. AXE USA does not check any mill's licence, insurance, ability, or whether it is still in business - this page republishes a public record and nothing more.

Reading this listing

What it means for your timber

No species line was published for this address, so what it will and will not take is a question for the mill itself. The species guides are the other half of that conversation: what you are holding, and what it is normally worth.

It is one of 4 facilities listed in Washington Parish, which is where a search for a sawmill near me starts if your ground is in that parish. The Washington Parish section of the state page has every one of them side by side, and all 63 Louisiana listings run across 29 parishes - which is the map that decides whether a load leaves your gate for twenty minutes or two hours.

Anybody searching for a sawmill near me needs more than one gate. If this one will not take your wood, the nearest other listings are Price West Monroe in West Monroe, 177 miles away, Winn Timber Products in Winnfield, 180 miles away and Bear Creek in Hodge, 197 miles away. Distances are straight lines between the coordinates the sources published - not road miles, and not a statement that anybody is buying.

None of this says whether the gate is open or what the load would fetch - no agency document records that. A price comes out of a sale run properly: the landowner's guide to selling timber takes the steps in the order they happen, and sealed bidding puts one tract in front of several buyers at once instead of taking the first number offered.

What else is listed around it

4

Listed facilities in Washington Parish

1

Of them run as a chip mill

177mi

Straight line to the nearest other chip mill

63

Listed facilities statewide

Across Washington Parish the sources list 2 sawmill listings, 1 chip mill, 1 pulp & paper mill. A facility can be listed under more than one of those, so the numbers overlap rather than adding up.

Where this listing comes from

Edition
June 2022
Fetched by AXE USA
2026-08-18

Fields are never merged between documents: every line above came from this one record, so a listing from a source that publishes no phone number stays without one.

Other mills in Washington Parish

Every other listed facility in Washington Parish, Louisiana.

All of Washington Parish

This listing comes from an agency document. Mills close and move between publications. If you know this one is shut, has moved, or the number is wrong, tell us and we will check it.

Got timber to move in Washington Parish?

This listing says where Joe N. Miles & Sons, LLC is and what the agency records it as taking. It does not say what it will pay. Put the tract out for sealed bids and let the buyers around Bogalusa answer that themselves.