Dixie County · Florida mill directory
Cross City Veneer Co., Inc.
Veneer & plywood mill
Cross City Veneer Co., Inc. is listed as a veneer and plywood plant at 106 NE 180th Street, Cross City, FL 32628, in Dixie County. If you came looking for a veneer and plywood plant near me, this is the Cross City end of that question: the address is published, your own is not, so the haul is yours to measure. The listing is published by Primary Forest Products Network (Southern Group of State Foresters); AXE USA republishes it as it stands and adds nothing to it.
Where it is
106 NE 180th StreetCross City, FL 32628
- Town
- Cross City
- County
- Dixie County, Florida
- ZIP
- 32628
- Published coordinates
- 29.62866, -83.11075
No contact published
Primary Forest Products Network (Southern Group of State Foresters) publishes this facility's location but no phone number, email, or website, and AXE USA does not fill that gap from anywhere else. The agency record linked below is the place to check for a number.
What this facility is
Veneer & plywood mill
A veneer and plywood plant peels or slices logs into thin sheets and presses them into panels. Veneer logs are graded hard on straightness, diameter and knots, so this is a quality market: a short butt log of the right form is worth more here than a truckload of pulpwood anywhere else.
What it takes
Hardwood is the only material the source records this facility as accepting.
No agency document says whether this facility is buying today, what it pays, the minimum load it will take, or how far it will haul. AXE USA does not check any mill's licence, insurance, ability, or whether it is still in business - this page republishes a public record and nothing more.
Reading this listing
What it means for your timber
The source goes no further than hardwood here, which is a starting point rather than a specification. The species guides take the trees one at a time - what each is cut for, how it is graded, and where the line between pulpwood and sawtimber falls.
It is one of 5 facilities listed in Dixie County, which is where a search for a sawmill near me starts if your ground is in that county. The Dixie County section of the state page has every one of them side by side, and all 59 Florida listings run across 31 counties - which is the map that decides whether a load leaves your gate for twenty minutes or two hours.
Anybody searching for a sawmill near me needs more than one gate. If this one will not take your wood, the nearest other listings are Boise Cascade - Havana in Havana, 105 miles away, Cross City Lumber in Cross City and Old Castle Lawn and Garden - Cross City in Cross City. Distances are straight lines between the coordinates the sources published - not road miles, and not a statement that anybody is buying.
None of this says whether the gate is open or what the load would fetch - no agency document records that. A price comes out of a sale run properly: the landowner's guide to selling timber takes the steps in the order they happen, and sealed bidding puts one tract in front of several buyers at once instead of taking the first number offered.
What else is listed around it
5
Listed facilities in Dixie County
1
Of them run as a veneer & plywood mill
105mi
Straight line to the nearest other veneer & plywood mill
59
Listed facilities statewide
Across Dixie County the sources list 3 mulch plant listings, 2 sawmill listings, 1 veneer & plywood mill. A facility can be listed under more than one of those, so the numbers overlap rather than adding up.
Where this listing comes from
- Source document
- Primary Forest Products Network (Southern Group of State Foresters) (opens in a new tab)
- Edition
- Continuously maintained - the source publishes no edition date
- Fetched by AXE USA
- 2026-08-18
Fields are never merged between documents: every line above came from this one record, so a listing from a source that publishes no phone number stays without one.
Other mills in Dixie County
Every other listed facility in Dixie County, Florida.
Nearest Veneer & plywood mill listings in Florida
Ordered by straight-line distance from the coordinates the source published for Cross City Veneer Co., Inc. - not by road miles, and not by who is buying.
This listing comes from an agency document. Mills close and move between publications. If you know this one is shut, has moved, or the number is wrong, tell us and we will check it.
Got timber to move in Dixie County?
This listing says where Cross City Veneer Co., Inc. is and what the agency records it as taking. It does not say what it will pay. Put the tract out for sealed bids and let the buyers around Cross City answer that themselves.